Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Mayfair?
Chimney cap and crown work in Mayfair typically runs from about $185 to $340 for a standard stainless-steel cap installed on a single flue, and $650 to $1,900 for crown repair or replacement, depending on the crown size and how much masonry has to come out. A full cap-and-crown package on a typical Mayfair rowhouse chimney usually lands between $850 and $2,200. We set every job by a written estimate, so the number you get on paper is the number you pay.
Those ranges hold for most of what we see in Mayfair: brick chimneys on 1920s and mid-century homes, some with original crowns that have been patched once already, and a good share with single-flue masonry stacks that take a stock-size cap cleanly. Homes closer to Frankford Avenue and the busier corridors tend to show more crown wear from exhaust and weather cycling, while the quieter streets off Cottman and Rowland see more of the slow spalling that comes from freeze-thaw over decades. Either way, the price moves with the condition of the crown, not the neighborhood.
What we do differently is look at the whole chimney envelope at once – cap, crown, flue, chase cover, and the masonry below – so you’re not paying one contractor for the cap and another for the crown three months later. Our technicians have up to 9 years of experience, and we specify Gelco and Famco caps because they’re made for a precise fit on the flue and hold up to weather, not because we get a deal on them.
Call (888) 841-6695 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Single-flue stainless cap: typically $185 to $340 installed.
- Crown repair (minor): $650 to $1,100; crown replacement: $1,100 to $1,900.
- Combined cap and crown on a Mayfair rowhouse: $850 to $2,200, most often.
- Custom caps for odd flue sizes or multi-flue stacks cost more than stock-size.
- Free estimates, written pricing, and a scope that covers the whole chimney in one call.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for Mayfair homes. These are typical ranges, and the written estimate sets the final price.
| Line Item | Typical Range (Installed) |
|---|---|
| Single-flue stainless steel cap (stock size) | $185 – $340 |
| Multi-flue cap or custom-fit cap | $340 – $720 |
| Chase cover for a factory-built fireplace | $280 – $620 |
| Crown repair (seal, patch, re-slope) | $650 – $1,100 |
| Crown replacement (demolition and rebuild) | $1,100 – $1,900 |
| Crown rebuild with masonry repair to the top courses | $1,500 – $2,600 |
| Combined cap and crown package | $850 – $2,200 |
| Animal guard or spark screen add-on | $90 – $200 |
The single biggest cost driver is the crown itself. A crown that has a hairline crack and still slopes properly can usually be sealed and re-sloped for less than a full rebuild. A crown that has spalled down past the bed joint, or that cracked because the flue tile below it is moving, has to come off and be formed again with a proper overhang and drip edge. When we open up a crown and find the top courses of brick are soft from years of water, the rebuild scope grows, and that’s the step that pushes a job toward the upper end of the table.
Cap pricing moves on flue size and flue count. A single 8-inch flue on a standard Mayfair rowhouse almost always takes a stock-size Gelco or Famco cap cleanly. A chimney with an oversized flue tile, or two flues with separate terminations, needs a custom-fit cap or a full chase-style cover, and that’s where the number climbs. We specify those brands because they’re sized for the flue and made of material that doesn’t rust out in a few winters the way discount caps do.
If your chimney needs more than cap and crown work, see our Chimney Sweep Mayfair page for the full picture, including sweep, liner, and rebuild service. Crown and cap are often the first things we find on an inspection, but they’re rarely the only thing worth checking.
What Affects Chimney Cap & Crown Pricing in Mayfair
- Access and height. Most Mayfair chimneys are two to three stories, and a rowhouse with a shared party wall and no rear yard access takes more setup than a detached home. Steep roof pitch or a chimney set close to a neighbor’s roofline adds time and equipment to the job, and that’s reflected honestly in the estimate.
- Crown size and slope. A crown that’s sized for a single flue is a smaller pour than a crown spanning two or three flues. The correct fall of the crown – enough to shed water away from the flue, not so much that it looks odd – takes forming, and the size of the pour is part of the price.
- Condition of the masonry below the crown. If the cap and crown are failing, water has usually been getting in for a while, and the top two or three brick courses may be soft or spalled. If they stay, the new crown goes back onto sound brick. If they don’t, they come out and get replaced, and that adds cost.
- Flue count and flue size. Single flue, dual flue, or an oversized tile with an insert: each changes the cap that has to be specified, and a custom cap costs more than a stock one.
- Material choice. Stainless steel is standard for longevity and holds up to the freeze-thaw cycling that Mayfair sees in winter. Cheaper galvanized caps rust through in a few seasons and have to be replaced. The Gelco and Famco caps we install are stainless or heavy-gauge finishes, sized to fit the flue as it is.
- Whether you combine work. A cap installed at the same visit as a crown rebuild shares the setup and the climb, and the combined total is consistently lower than doing them separately. Coordinating one crew for both is also fewer appointments and less disruption at the house.
We also look at the smoke chamber and the flue tiles when we’re up top. A crown that’s failed because the flue tiles have shifted is a different repair from a crown that simply aged out, and it’s worth knowing which one you’re dealing with before the estimate is written. If the firebox or flue joints look rough, our chimney cap & crown page walks through the parts of the job and what each covers.
How to Save on Chimney Cap & Crown
There’s no way to make a crown rebuild cheap without cutting the wrong corner, but there are ways to make sure you don’t pay for work you don’t need.
- Get the crown looked at before it fails. A crown that’s caught in the early stage – a hairline crack, a small spall, a little water staining below the crown – can usually be sealed or re-sloped rather than rebuilt. Waiting until pieces come off the top of the chimney is the most expensive path.
- Combine the cap and crown in one visit. The setup, the access, and the climb are shared, and the combined price is lower than two separate appointments. It also means one contractor taking responsibility for the whole job.
- Don’t replace a sound cap. A stainless cap that’s still solid and correctly sized doesn’t need changing just because it’s a few years old. We’ll tell you when a cap is serviceable and when it isn’t.
- Ask for the written scope, in plain terms. A free estimate should say what’s included: cap size, crown forming, masonry repair, disposal. If a quote is one line and a number, ask what’s inside it before you agree.
- Keep water moved off the crown. A properly formed crown with a drip edge and a correctly sized cap keeps most of the water off the masonry. The cap and crown work together, and doing both together is the lower-cost outcome most times.
A free estimate is the cheapest step in this job. Call (888) 841-6695 and we’ll put a written scope and price in front of you before anything is scheduled.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Mayfair?
A single-flue stainless cap in Mayfair typically runs $185 to $340 installed, and a multi-flue or custom-fit cap runs $340 to $720. The price depends on flue size and flue count more than anything else. Call (888) 841-6695 for an exact quote – estimates are free.
How much does chimney crown repair cost in Mayfair?
Crown repair in Mayfair usually costs $650 to $1,100, and a full crown replacement runs $1,100 to $1,900. If the brick courses below the crown are soft and need to be replaced too, the total can reach $2,600. Call (888) 841-6695 and we’ll tell you which one your chimney actually needs before you commit.
Is it cheaper to repair the crown or replace it?
Repair is cheaper when the crown is still sound at its base – typically $650 to $1,100 versus $1,100 to $1,900 for a replacement. Repair only works when the crown still slopes correctly and the brick below it is solid. If the crown has spalled past the bed joint or the flue tiles have shifted, a repair won’t hold, and replacement is the lower-cost option over time. Call (888) 841-6695 for a free estimate and an honest read on which applies.
How much does a chimney cap and crown cost together?
A combined cap and crown job in Mayfair typically runs $850 to $2,200, which is consistently less than booking the two jobs separately. Combining them shares the access and the setup, and it means one crew owns the whole result. Call (888) 841-6695 to bundle the estimate.
Can you come today for a chimney cap or crown estimate?
Same-day estimates are often possible. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 841-6695 and we’ll find the soonest slot for a free estimate.
Why the Full-System Approach Matters on a Cap and Crown Job
The cap and crown are the top of a chimney, but they’re not the whole story. Water that gets past a failed crown doesn’t stop at the crown: it moves down through the masonry, into the smoke chamber, and onto the firebox floor. That’s why we look at the whole chimney envelope on an estimate, not just the part you called about. If the flue tiles are cracked below a failed crown, capping the top won’t keep water out of the liner. If the firebox is deteriorating, a HeatShield resurfacing job can often restore it without a full liner replacement, provided the flue joints are sound enough. We work with DuraFlex flexible stainless liner systems when a reline is the right answer, and HeatShield when a firebox resurfacing will do the job.
The point isn’t to sell you more work. It’s that a cap and crown estimate should tell you what else is worth checking while the chimney is open. That’s the difference between a contractor who installs a cap and one who understands what the cap protects. Our technicians have up to 9 years of experience, and we source materials through Olympia Chimney and Copperfield – the same wholesale supply chains professional chimney contractors use – so the cap and crown we install are the same components specified on certified jobs elsewhere.
We also handle the rest of the chimney if it comes up: sweeping, liner installation, structural repair, and full rebuilds. One contractor, one chimney, one point of responsibility. If you’re preparing to sell a Mayfair home and need the chimney documented as clean and sound, or you’ve noticed a draft or an odor from the fireplace, the cap and crown are the first things to check – and a free estimate is the place to start.
Call (888) 841-6695 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Mayfair market as of 2026. Chimney Sweep Mayfair offers free estimates – call (888) 841-6695.
Written by the team at Chimney Sweep Mayfair.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Katie Whitaker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Lucia Morales"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Neil Lawson