Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Rhawnhurst
If you’re in Rhawnhurst and your chimney crown is spalling or your cap is rusted through, you’re looking at a fix that runs roughly $185 to $1,450 depending on what’s actually wrong up there. We handle chimney cap and crown work across Rhawnhurst and the tight rowhouse blocks of Northeast Philadelphia, and we know how these mid-century brick stacks are put together. Our technicians have up to 9 years of experience, and every job starts with a free written estimate that sets the price before any work begins. Call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Rhawnhurst Homeowners Call Chimney Sweep Mayfair for Chimney Cap & Crown
Chimney work in Rhawnhurst has a rhythm you only learn by doing it here. The housing is mostly 1940s to 1960s brick rowhouses and twins, one or two interior chimneys per home, original clay tile liners, and shallow fireboxes. The frontages are narrow and the walls are shared, so a technician on a Rhawnhurst roof is often working from a flat or low-pitch surface and coordinating access through a neighboring property just to reach the stack. We plan that access before we arrive instead of working it out on the ladder.
That local pattern shapes how we quote crown and cap work. We specify Gelco and Famco caps for weathertight fit and correct flue sizing, and we use DuraFlex flexible stainless steel when the original terracotta has cracked through. Nothing gets recommended without camera evidence you can see and keep. If a crown can safely wait a season, we tell you so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Rhawnhurst
Chimney Cap Installation
A properly sized cap keeps rain, birds, and squirrels out of the flue, and in Rhawnhurst it also protects whatever liner is still doing its job. We size the cap to the actual flue, not the nearest shelf model, because a loose fit rattles and a tight one chokes draft. Custom fabrication matters most on the older single-flue stacks common on these blocks.

Chimney Cap Replacement
Original caps on 1950s multi-flue stacks rust out from the inside first, and by the time the rust shows on top the flue has been taking water for years. We pull the old cap, check the tile below it, and fit a replacement that seals the whole opening. On Rhawnhurst party-wall stacks, a multi-flue cap often protects more than one flue in a single housing.

Crown Repair
The crown is the concrete or mortar cap on top of the brick, and in this climate it takes a beating from repeated freeze-thaw cycles. Spalling, hairline cracks, and loose mortar at the crown edge all let water into the chimney body, which is where liner damage usually starts. We repair the crown before it becomes a masonry rebuild, and we tell you plainly when a repair is enough.

Crown Coating
A flexible crown coating buys real years when the crown is sound underneath but weathered on top. We only coat over clean, intact mortar. Coating a cracked or dirty crown just seals in the problem, and those coatings peel within a few seasons.
Trusted Brands We Service in Rhawnhurst
We work with the professional-grade lines the trade actually specifies: DuraFlex flexible stainless steel liners, HeatShield for firebox and joint restoration, Gelco and Famco caps, Olympia Chimney and Copperfield supply. These aren’t big-box substitutes, and they’re chosen because they hold up in a Northeast Philadelphia freeze-thaw cycle. We don’t stock parts locally or claim a warehouse; we source what your chimney needs and schedule the work around it. You get one contractor for the whole chimney envelope: sweep, cap, crown, liner, rebuild, fireplace repair.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Rhawnhurst Homes
- Spalling crowns from freeze-thaw. Repeated winter cycling cracks the crown, water gets in, and the damage moves down into the brick and liner. Catch it at the crown and it stays a crown job.
- Rusted or missing caps on 1950s multi-flue stacks. Rain and animals enter shared flues and accelerate liner deterioration. A missing cap is often the first thing we find on an original stack.
- Cracked terracotta liners in party-wall chimneys. These often go unnoticed until a Level 2 inspection turns up adjacent damage, sometimes requiring a HeatShield or DuraFlex liner.
- Improperly sized caps on wood stove flues. A jury-rigged cap causes poor draft and heavier creosote buildup, which matters more when wood is a primary heat source.
Pricing for Chimney Cap & Crown in Rhawnhurst, PA
A typical chimney cap installation in Rhawnhurst runs $185 to $450 for a single-flue standard cap, and $350 to $750 for a custom or multi-flue cap sized to an original clay tile liner. Crown repair runs $450 to $1,100 when the crown needs rebuilding or resurfacing, and a flexible crown coating is usually $250 to $500. Adding a DuraFlex liner because the tiles cracked pushes the job higher. What moves the number: flue count, whether the crown can be coated or must come off, roof access through a narrow shared driveway, and whether a liner is needed. The written estimate sets the final price. There’s no charge for the estimate itself.
We Also Serve Cities Near Rhawnhurst
We cover Rhawnhurst along with Mayfair, Holmesburg, Fox Chase, and Oxford Circle. These neighborhoods share the same mid-century rowhouse stock and the same party-wall chimney issues, so the work is familiar from block to block. If you’re just outside Rhawnhurst, call and we’ll tell you whether we cover your street.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Rhawnhurst
Yes. A custom cap can be sized and fitted to your flue alone, even when the stack is shared with the attached neighbor. We inspect the party-wall stack, confirm which flues serve your home, and fabricate a cap to those dimensions. Call (888) 841-6695 for a free estimate.
Once a year, and sooner if you notice heavy creosote or poor draft. Wood burned as primary heat loads creosote faster than occasional fires, so an annual inspection before the heating season keeps the flue safe. Call (888) 841-6695 to book an inspection.
Loose mortar, visible cracks through the crown, spalling concrete, or a crown that slopes the wrong way all mean repair, not coating. A coating only works over a sound, clean crown. We check with camera evidence and tell you what we see. Call (888) 841-6695 for an exact quote.
Yes. In Rhawnhurst party-wall stacks, a failed liner next door often means the same original 1950s clay tile is deteriorating in your flue. A Level 2 inspection will show the condition before it becomes a bigger job. Call (888) 841-6695 to schedule one.
Yes. A correctly sized cap keeps rain and humid summer air out of the flue, which reduces the creosote odor that gets worse in warm, damp weather. It also stops animals and debris. Call (888) 841-6695 for a free estimate.
Ready to sort out your crown or cap? Call (888) 841-6695 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes outside dispatch hours, it’s booked into the next opening, Sunday through Friday, 7am to 7pm. Nothing gets recommended without camera evidence you can see, and we’ll tell you plainly when the work can safely wait.
Written by the team at Chimney Sweep Mayfair.