Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Cornwells Heights
If your crown is crumbling or your flue has no cap, you’re right to deal with it before the first hard freeze. In Cornwells Heights, we see it often: the mortar cap at the top of a 1950s – 70s brick chimney has cracked, rain is finding its way down, and the damper below has started to rust. We work on the whole chimney envelope, from firebox floor to cap crown, and we don’t recommend a thing you can’t see for yourself on camera. Call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Why Cornwells Heights Homeowners Call Chimney Sweep Mayfair for Chimney Cap & Crown
Cornwells Heights is a tight-knit Philadelphia suburb, and word travels. Our reputation here rests on the same thing it does everywhere: we show the homeowner the evidence before we quote anything, and we say plainly when work can safely wait. Our technicians have up to 9 years of experience, and they read an old chimney the way you read the rest of the house.
We’re a chimney specialty, not a generalist who sweeps as a side service, so the person who inspects your flue is the same tradesperson equipped to install the cap, repair the crown and reline the chimney if it comes to that. One contractor, one chimney, no coordinating three separate specialists. For Cornwells Heights, we understand what the older housing stock means: clay tile liners are often cracked or unsealed, and the nearby Delaware River adds a dampness that speeds up creosote deterioration. Chimney cleaning on these homes isn’t just sweeping. It’s frequently the first step toward relining. We treat annual inspections as non-negotiable because of it, and we’ll always tell you what we found and where we found it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Cornwells Heights
The cap and the crown are two different parts of the same job, and confusing them is where a lot of bad advice starts. The crown is the mortar cap at the top of the masonry, sloped to shed water. The cap is the metal or stainless cover that sits on top of the flue. Cornwells Heights crowns fail on a shorter timeline than you might expect, so both matter. Here’s how we handle the scope.
Cap Installation in Cornwells Heights
An uncapped flue takes rain, snow, and whatever else finds its way down, which accelerates creosote deterioration and causes draft problems. We install caps sized to the flue, not a generic lid that rattles. Because the humidity here is high, we specify Gelco and Famco chimney caps for weathertight performance and correct flue sizing, and a multi-flue cap when the stack serves more than one appliance.

Cap Replacement in Cornwells Heights
Older caps rust, warp, or lose their bird screen, and a failed cap does more damage than no cap if water is pooling on top of it. We replace them with a proper fit, checking the flue size before we order a thing. If the original was undersized, we say so.

Crown Repair in Cornwells Heights
This is the work we’re called out for most in Cornwells Heights. The mortar crown has often been cracked for years before anyone notices, and by then water is dripping onto the damper and staining the smoke chamber. We remove the failed crown, rebuild it with proper overhang and slope, and check the flashing while we’re up there. Sometimes spalling brick and failed flashing masquerade as a crown problem and need separate repair. We confirm which. Nothing gets rebuilt on a guess.

Crown Coating in Cornwells Heights
Not every crown needs rebuilding. When the mortar is sound but the surface is cracking, a crown coating seals it and buys real years. It’s a treatment for the right candidate, not a blanket recommendation. We only offer it where the camera inspection and a physical check support it. See our chimney cap & crown service page for the full scope.
Trusted Brands We Work With in Cornwells Heights
We specify professional-grade brands for a reason. Gelco and Famco caps are made for precision fit and weather performance, not the hardware-store substitutes that fail in a few winters. For liner systems, we install and work with DuraFlex flexible stainless steel, the standard professional installers specify for relining. We source through Olympia Chimney and Copperfield, the supply chains professional contractors rely on. For firebox and liner-joint deterioration in qualifying systems, HeatShield lets us resurface and seal the damage without a full demolition. We turn these jobs around quickly because we work in this trade daily, not as an add-on.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Cornwells Heights Homes
Much of Cornwells Heights is post-WWII brick and stone colonials and split-levels, many with original masonry fireplaces and exterior chimneys that have weathered decades of freeze-thaw cycles. Here’s what that looks like up close.
- Cracked mortar crowns on 1950s – 70s homes. The crown spalls and cracks from river-enhanced humidity, letting water drip onto the damper and smoke chamber. It’s rarely visible from the ground, which is why a camera inspection matters.
- Clay tile flues with no cap. Rain and animals get in, creosote deteriorates faster, and draft problems follow. A cap is often the whole fix for a flue that’s otherwise sound.
- Spalling brick and failed flashing. This is often mistaken for a crown issue. It’s a separate repair, and calling it correctly is the difference between a real fix and a wasted one.
- Factory-built metal fireplaces in newer infill homes. A growing number of newer homes here have them. They still need proper venting checks, even though they’re not masonry.
Pricing for Chimney Cap & Crown in Cornwells Heights, PA
Pricing here reflects both the local market and the condition of the stack. A typical crown repair in Cornwells Heights runs $450 – $1,200, depending on the size of the crown, whether it needs a full rebuild, and how much water damage has reached the smoke chamber. A crown coating for a sound but surface-cracked crown runs $350 – $600. A standard single-flue cap installation runs $250 – $450, and a multi-flue cap usually runs $400 – $850. Cap replacement on an existing flue sits in a similar range. These are typical estimates. The written estimate sets the final price, and the estimate itself is free. Nothing is recommended without camera evidence you can see.
We Also Serve Cities Near Cornwells Heights
Cornwells Heights sits close to several communities, and the same scope travels. We also serve Holmesburg, Rhawnhurst, Mayfair, and Fox Chase. If you’re in or around Cornwells Heights, call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Cornwells Heights, PA – Our Local Coverage Area
We serve Cornwells Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Cornwells Heights
Look for cracking, spalling, or a crown that no longer sheds water cleanly off the top, but the reliable answer comes from a camera inspection. In Cornwells Heights, river-adjacent humidity makes crowns fail years earlier than in neighboring towns, so the surface you can see from the ground often hides the worst of it. Call (888) 841-6695 for an exact quote. Estimates are free.
Yes, an uncapped flue takes rain and animals year-round, accelerating creosote deterioration and causing draft problems. Given the damp air here, an uncapped flue deteriorates noticeably faster. A properly sized cap solves most of it. Call (888) 841-6695 for an exact quote on a cap sized to your flue.
Crown repair rebuilds a failed crown with proper overhang and slope. Crown coating seals a surface that’s sound but cracking, without a rebuild. Which one you need depends on the condition of the mortar underneath, and we’ll say plainly which. Call (888) 841-6695 for an exact quote.
Yes. A cracked crown lets water into the stack, which rusts the damper and stains the smoke chamber, and that interferes with draft. The damage may look minor from the ground. Call (888) 841-6695 and we’ll run a camera inspection before recommending anything.
Annually, and the local conditions are the reason. The housing stock is old enough that clay tile liners are frequently cracked or unsealed, and the proximity to the Delaware River adds a dampness that accelerates creosote deterioration. Cleaning season peaks in late fall when homeowners fire up for the first time, so a routine sweep here regularly turns into crown repair before the first hard freeze. Call (888) 841-6695 for an exact quote. Estimates are free.
If you’re in Cornwells Heights and your crown is crumbling or your flue is wide open to the weather, call us and we’ll come look. We’ll show you what the camera finds, tell you what has to be done now and what can wait, and put it in writing. Our technicians have up to 9 years of experience, and we work with the pro-grade brands the trade trusts. Call (888) 841-6695 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Mayfair.