Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Mayfair?
A chimney liner replacement in Mayfair typically runs $2,400 to $5,800, and a partial rebuild commonly falls between $4,500 and $9,000. A full top-to-bottom rebuild can reach $12,000 to $28,000 depending on height, material, and how much of the structure has failed. The written estimate sets the final price, and we give that estimate free.
These numbers matter because liner and rebuild work is where most chimney money gets spent, and where a vague quote hides the most risk. If your flue is unlined, cracked, or pulling air and smoke back into the house, the price you’re quoted should tell you exactly which components are being replaced and why. Call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A standard DuraFlex flexible stainless liner install in Mayfair runs roughly $2,400 to $5,800 all-in.
- HeatShield firebox and flue-joint resurfacing can sidestep a full liner replacement in qualifying systems, often saving several thousand dollars.
- Partial rebuilds (crown, top courses, flashing) land around $4,500 to $9,000. Full rebuilds jump sharply once the chase or interior masonry is involved.
- Diagnostics, inspection, and a written scope are free. The estimate is what you budget from.
- Our technicians have up to 9 years of experience, and every job is scoped as a full chimney, not just a flue.
Chimney Liner & Rebuild Cost Breakdown (2026)
Every liner or rebuild job breaks into line items. Below are the typical ranges we see in the Mayfair market for 2026. These are estimates, not quotes. The written estimate you receive after inspection is what governs the work.
| Line Item | Typical Mayfair Range (2026) | Notes |
|---|---|---|
| Level 2 inspection & written scope | Free | Included with any liner or rebuild quote |
| Flexible stainless liner install (single flue) | $2,400 – $5,800 | DuraFlex system, sized to appliance, insulated where required |
| Liner for a second flue (dual-flue home) | $1,800 – $4,200 additional | Common in older Mayfair rowhouses with two appliances |
| HeatShield firebox resurfacing | $650 – $1,400 | Restores firebox and seals damaged joints without demolition |
| HeatShield flue-joint repair (qualifying systems) | $1,200 – $2,800 | Can avoid full liner replacement when flue is otherwise sound |
| New chimney cap (Famco or Gelco) | $280 – $650 | Correct flue sizing and weather performance, not off-the-shelf hardware |
| Crown rebuild or crown coat | $900 – $2,600 | Spalling or cracked crown is the usual reason water reaches the flue |
| Chase cover replacement | $650 – $1,600 | Fabricated to fit the chase and appliance size |
| Top-course masonry rebuild | $2,200 – $4,800 | Rebuild above the roofline where freeze-thaw has taken courses |
| Full partial rebuild (crown, top courses, flashing) | $4,500 – $9,000 | Scope depends on how far decay runs down the chase |
| Complete chimney rebuild (above and through the roof) | $12,000 – $28,000 | Total demolition and rebuild; height and access drive the range |
| Fireplace damper or firebox repair | $350 – $2,200 | Depends on whether repair or restoration is needed |
| Chimney sweep before relining | $180 – $320 | Required for a clean liner surface and proper sizing |
The spread within each line is real. A liner on a short exterior chimney with clean access sits near the bottom of the range. A liner on a tall interior chimney, or one that needs an insulated wrap to keep flue gas temperature up in cold weather, sits near the top. Rebuild pricing swings the most because it depends on how far the decay runs. Water gets into a Mayfair chimney through the crown or flashing, freezes, and pushes masonry apart over many seasons. The repair that starts as a crown coat can become a top-course rebuild once the masonry is opened up. That’s why we scope rebuilds from the top of the chase downward and price the worst realistic case in the written estimate.
What Affects Chimney Liner & Rebuild Pricing in Mayfair
- Chimney height and access. A taller chimney needs more liner footage and more labor at height. Access on tight city lots, where a ladder can’t be planted cleanly, changes how a job is set up and what it costs.
- Interior vs. exterior chimney. Exterior chimneys run cold, and an uninsulated stainless liner in an exterior chase can condense creosote and moisture where you’ll never see it. Insulating the liner adds cost but protects the flue and the appliance.
- Condition of the crown and flashing. Water is the primary killer of masonry chimneys in this climate, and freeze-thaw cycles are the mechanism. If the crown is cracked or the flashing is loose, we price that before the liner, because a new liner under a leaking top fails the same way the old one did.
- Masonry condition below the roofline. Spalled brick, failed mortar joints, and a rusted chase cover all need addressing in the same project. Opening up the chase often reveals more decay than the visible face suggested.
- Firebox and flue-joint damage. In qualifying systems, HeatShield restoration can seal cracked joints and resurface the firebox without demolishing the chimney. That’s a different price point than a full reline and rebuild.
- Liner system specified. We specify DuraFlex flexible stainless steel because it’s the system professional installers use for relining, and it’s sized to the appliance. Generic, unlisted hardware is a false economy on a flue.
How to Save on Chimney Liner & Rebuild
The biggest savings come from sequencing work correctly. If the crown is failing, repair it before the liner is installed. If the liner is intact but the firebox joints are cracked, HeatShield restoration may let you avoid a full reline altogether. Fixing the top of the chimney before winter keeps water out and stops masonry decay where it starts.
Get a written, line-item estimate before anyone touches the chimney. A lump-sum quote obscures what’s being replaced and what isn’t. Free estimates are standard here, and for good reason: the scope should be visible to you. Call (888) 841-6695 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
One more practical point: don’t skip the sweep before relining. A liner can only be sized and seated correctly on a clean flue, and a dirty flue hides defects that change the scope once work begins. Sweeping first protects you from a surprise increase mid-job.
What’s Involved in a Liner Installation or Rebuild
A liner installation starts with a Level 2 inspection and a sweep. The flue is measured, the appliance is matched to a correctly sized DuraFlex stainless system, and the liner is insulated where the chimney runs cold. The top plate, cap, and any damaged crown or flashing are addressed in the same project so the chimney is sealed as a whole. One contractor, one chimney.
A rebuild is a demolition and reconstruction job. The failed sections come off, the masonry is inspected course by course, and the new work is built back with materials that will hold up to the freeze-thaw weather. Crowns are formed and sloped to shed water, caps are specified to fit the flue exactly, and chase covers are fabricated for the opening. Full-system scope is what separates a lasting repair from a patch.
Both liner and rebuild work feed into the broader chimney liner & rebuild service we provide for homes across the area, so a single estimate can cover inspection, relining, masonry, and fireplace repair without you chasing separate contracts. If you’re starting from a sweep and inspection, our Chimney Sweep Mayfair team handles that first and can carry the findings straight into the scope.
Why Material Matters on a Liner or Rebuild
We specify DuraFlex flexible stainless steel for relining because it’s the system professional installers plan around: it flexes through offsets, it’s sized to the appliance, and it lasts. We prefer HeatShield for firebox and joint restoration because, in qualifying systems, it saves the structure without demolition. Caps come from Gelco and Famco, known for precision fit and weather performance, and we source through Olympia Chimney and Copperfield, the same wholesale supply chains professional contractors rely on. Big-box substitutes aren’t part of our scope. These details are why a specialist quote reads differently from a handyman quote.
Safety: Why Liner and Rebuild Work Isn’t a DIY Job
A failed liner or firebox exposes the framing and structure of your home to flue gases and heat. Creosote buildup in a damaged flue can ignite, and carbon monoxide can leak into living space through a cracked liner joint. The firebox and flue joints themselves are a genuinely dangerous component of this trade: heat damage, cracked brick, and crumbling joints are hard to identify visually and harder to repair safely from a ladder. This work belongs with a trained professional who can inspect the full system and confirm it’s sound before the fireplace is used again. The scope here is what to have checked and why, not a how-to you should attempt yourself.
Frequently Asked Questions
How much does a chimney liner cost in Mayfair?
A typical single-flue liner install in Mayfair runs $2,400 to $5,800 for a DuraFlex stainless system, sized to your appliance and insulated where the chimney needs it. Taller chimneys, exterior chases, and second flues push toward the higher end. Call (888) 841-6695 for an exact quote. Estimates are free.
Is it cheaper to reline or rebuild the chimney?
Relining is almost always cheaper, at roughly $2,400 to $5,800, compared with $12,000 to $28,000 for a full rebuild. A rebuild makes sense only when the masonry and structure have failed, not merely the flue surface. A Level 2 inspection tells you which problem you actually have. Call (888) 841-6695 for a free estimate.
Can HeatShield save me from a full liner replacement?
Sometimes. HeatShield firebox and flue-joint restoration runs roughly $650 to $2,800 for qualifying systems and can seal damaged joints without demolition or a full reline. Whether your system qualifies depends on the flue condition. Call (888) 841-6695 for an exact quote. Estimates are free.
How much does a partial chimney rebuild cost in Mayfair?
A partial rebuild, covering the crown, top courses, and flashing, typically runs $4,500 to $9,000. The final price depends on how far decay runs down the chase and whether the chase cover needs replacement. Call (888) 841-6695 for a free estimate and a line-item scope.
Can you come today to look at my chimney?
Same-day service is often possible. Call (888) 841-6695 and we’ll book the earliest opening. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your call is outside dispatch hours it’s booked into the next opening. Estimates are free.
What to Have Ready Before You Call
You’ll get a faster, more accurate estimate if you mention the appliance (wood-burning fireplace, insert, gas, or oil), any draft or odor symptoms, whether you’ve noticed water staining near the chimney, and whether the crown or flashing looks damaged from the ground. Photos of the chimney from the roofline help. A Level 2 inspection still drives the final scope, but your notes point us at the right things first. The estimate is per job, written, and free. Call (888) 841-6695 with your details in hand.
Chimney Sweep Mayfair handles liner installs, HeatShield restoration, cap and crown work, masonry rebuilds, and fireplace repair as a single scope. Why split a chimney between contractors when one specialist can inspect, scope, and finish the whole job?
Pricing reflects the Mayfair market as of 2026. Chimney Sweep Mayfair offers free estimates – call (888) 841-6695.
Written by the team at Chimney Sweep Mayfair.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Katie Whitaker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Lucia Morales"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Neil Lawson