Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fox Chase
If you live in Fox Chase, the odds are good that your chimney is older than most of the cars on your block. Many homes around here still have their original brick stack and clay tile flue from the 1920s through the 1950s, which changes how cap and crown work gets done. We know the housing stock here, we know what freeze-thaw does to soft local brick, and we know the tree cover that plugs up a cheap cap by mid-November. That local knowledge is why a Fox Chase cap job starts with a look down the flue, not a sales pitch for a new chimney. Call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fox Chase Homeowners Call Chimney Sweep Mayfair for Chimney Cap & Crown
Fox Chase is a neighborhood of older single-family homes, and that shapes nearly everything we do here. A chimney crown that’s thirty, forty, even seventy years old rarely fails the way a newer one does. It fails from the bottom up, one freeze-thaw winter at a time, until a hairline crack opens a path for water to work its way into the masonry. We treat that as the predictable pattern it is, and our technicians have up to 9 years of experience reading exactly those signs.
We’re a chimney specialist, not a generalist who sweeps as a side service. That matters here because cap and crown work on a Fox Chase chimney usually runs straight into questions about the flue liner underneath it. When we’re already working on your crown and your cap, you’re not scheduling a second contractor to inspect a liner that a first visit turned up. One contractor, one chimney, one point of accountability for the whole envelope, from firebox floor to cap crown. The local pro is licensed and insured as their state requires, and every sweep is quoted flat before we book, so the number you agree to is the number you pay.
We serve Fox Chase and the neighborhoods around it with the same full-system approach we bring to every chimney we touch. That familiarity is why we can tell a homeowner on a tree-lined street exactly why their spark screen keeps loading up, instead of guessing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fox Chase
Cap and crown work is where we do the most careful diagnostic work, because Fox Chase’s older chimneys punish shortcuts. Here’s what that looks like in practice.
Cap Installation in Fox Chase
A new cap protects the flue from rain, animals, and the leaf and seed-pod load that falls from the mature oaks and maples throughout Fox Chase. We size the cap to the actual flue, then seal the skirt against the crown so water can’t run in past the mounting. Because we’re working on 1920s – 1950s brick, we check for uneven or out-of-level crowns before we mount anything, since a stock cap bolted to a sloped surface leaves gaps that defeat the whole point.

Cap Replacement in Fox Chase
Old caps on Fox Chase homes usually fail from debris, not age. Leaves and seed pods pack the mesh and screen, moisture collects behind the blockage, and the cap starts corroding and trapping damp against the flue top. When we replace one, we specify a heavy-debris or custom-screened cap built for exactly the conditions this neighborhood creates, rather than swapping in the same universal cap that failed the first time. We specify Gelco and Famco caps for precision fit and weather performance.

Crown Repair in Fox Chase
The crown is usually the first thing to go on an older Fox Chase chimney. A crown poured flat with no overhang lets meltwater from freeze-thaw cycles soak into the masonry, and the next cold snap spalls the brick face and loosens the clay tile joints below. We repair or rebuild the crown with a proper overhanging pitch so water sheds off the edge instead of tracking down the flue, then check what the moisture did underneath.

Crown Coating in Fox Chase
Where the crown is cracked but structurally sound, coating can seal it without a full rebuild. We check for spalling and loose masonry first, since coating over a failing crown just hides the problem for a season. When the crown qualifies, coating is a sensible repair that holds up against Fox Chase’s freeze-thaw winters.
We also handle multi-flue caps and custom caps for Fox Chase homes with more than one flue opening, which is common on larger single-family and semi-detached houses here.
Trusted Brands We Service in Fox Chase
Our material choices are part of the trade. We install DuraFlex flexible stainless steel liner systems, spec Gelco and Famco caps and covers for precision fit, and source from supply chains like Olympia Chimney and Copperfield that professional contractors rely on rather than big-box substitutes. For firebox and liner joint restoration, we use the HeatShield system. When a crown or cap job on a Fox Chase chimney opens up a liner question, we can address it with the same visit and the same grade of materials. Ask us which brand fits your chimney and we’ll explain why we chose it.
Common Chimney Cap & Crown Problems We See in Fox Chase Homes
These are the failure modes that come up again and again on Fox Chase’s older housing stock, and each one has a cause you can see for yourself.
- Flat-poured crowns with no drip edge. Original crowns on Fox Chase brick chimneys were often poured flat, so meltwater sits on top and cracks under the freeze-thaw cycle. That water tracks down into clay flue tiles and spalls the soft local brick.
- Leaf and seed-pod debris against stock caps. The mature oak and maple canopy throughout Fox Chase packs leaves and pods against stock caps and spark screens, which kills draft and traps moisture against the crown and flue top.
- Cheap universal caps mounted without sealing. A cap bolted to an uneven, out-of-level crown leaves gaps at the flashing and skirt, so water and animals still get past it. A custom-screened or heavy-debris cap sized for the flue solves this properly.
- Appliance flues vented into stacks never designed for them. Older Fox Chase homes sometimes have heating or water-heater flues tied into chimneys built for a fireplace, and that mismatch shows up at the crown and cap before anywhere else.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Fox Chase, PA
We quote the crown and cap work per job, and the written estimate sets the final price. Typical ranges for Fox Chase:
- Cap installation: a stock or mid-grade cap on a single flue typically runs $250 to $500 installed.
- Heavy-debris or custom-screened cap: usually $400 to $850, sized to your flue and built for the tree load here.
- Multi-flue cap: commonly $600 to $1,200 depending on the number of flue openings and crown condition.
- Crown repair: $450 to $900 for rebuilding a cracked crown with a proper overhanging pitch.
- Crown coating: typically $300 to $600 where the crown qualifies for sealing rather than rebuilding.
What moves the price is the crown’s condition, how many flues you have, and whether the job uncovers a liner problem underneath. Nothing gets added without camera evidence in front of you, and a full sweep and inspection with a photo report is included so you can see the flue for yourself. Estimates are free.
We Also Serve Cities Near Fox Chase
We work across Northeast Philadelphia and into the towns around it, including Cheltenham Village, Oxford Circle, Rhawnhurst, and Mayfair. If you’re in Fox Chase or nearby and not sure whether we cover your street, give us a call and we’ll tell you straight. The same chimney cap & crown approach applies across the whole area, and you can book from Fox Chase the same way.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fox Chase
A hairline crack can often be coated, but only after we confirm the crown is structurally sound and not spalling. Coating seals the surface and sheds water, while rebuilding is the right call when the crown has lost its slope or the brick underneath is failing. We show you the condition first and tell you which one your crown actually needs. Call (888) 841-6695 for an exact quote – estimates are free.
The mature oaks and maples throughout Fox Chase shed leaves and seed pods that pack against flat or low-profile caps and spark screens, and a stock cap was never designed for that volume. The fix is a heavy-debris or custom-screened cap sized to your flue, not the cheapest cap on the shelf. A clogged cap kills draft and traps moisture against the crown, so it’s worth addressing before burn season. Call (888) 841-6695 and we’ll size the right cap for your chimney.
A cap is necessary but not sufficient on its own. If the clay tiles are cracked or the joints have loosened from decades of freeze-thaw, water protection at the top won’t fix a flue that’s already failing. We run a camera down the flue so you can see the liner yourself, and we tell you plainly when a liner is fine and when it needs relining. Nothing is recommended without camera evidence you can see. Call (888) 841-6695 for a free estimate.
You see the evidence before you decide. We run a camera down the flue, show you the photo report, and point out exactly which crown crack or flue joint drove the recommendation, so you’re judging the condition with your own eyes. If a crown can safely wait a season, we say so. The written estimate sets the final price, and the sweep is quoted flat before booking. Call (888) 841-6695 to schedule.
It does. Heavy creosote in a fireplace flue is a chimney fire risk independent of the cap or crown, and a compromised cap that lets moisture in can worsen the buildup by keeping the flue damp. We clean the flue and inspect it as part of cap and crown work, then show you what the camera found. A clean, well-capped flue burns better and drafts properly. Call (888) 841-6695 for a free estimate.
Get a Free Estimate on Your Fox Chase Chimney Cap or Crown
If your Fox Chase chimney has a cracked crown, a clogged screen, or a cap that’s seen better winters, the next step is simple. We run a camera down the flue, show you what we find, and tell you honestly whether the work can wait. The sweep is quoted flat before we book, the camera inspection and photo report come with it, and the local pro is licensed and insured as their state requires. Call (888) 841-6695 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Mayfair.