Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Frankford?
Chimney cleaning in Frankford typically costs $185 to $320 for a standard sweep of a working fireplace flue, and $320 to $550 once a video inspection, a stuck damper, or heavy creosote from regular wood burning gets involved. A masonry chimney with a heavy glaze pays more; a straight factory-built flue on a newer home pays less. Every figure here is an estimate – the written estimate sets the final price.
We run the whole chimney, not just the brush part. That means the firebox gets looked at, the smoke chamber gets checked, the cap and crown get inspected, and the liner joints get tested where they can be reached. What comes out of that inspection is what tells you whether you’re paying for a sweep or a sweep plus a repair.
Our technicians have up to 9 years of experience. chimney sweep mayfair handles sweeping, caps, crowns, liners, rebuilds, and fireplace repair, so one visit covers the whole envelope. For a free estimate, call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard sweep: $185 to $320 depending on flue length, access, and how much creosote has built up.
- Sweep with a Level 2 video inspection: $320 to $550, and worth it whenever you’ve bought the house or switched fuels.
- Heavy or glazed creosote (Stage 3) is priced separately because it’s slower, dirtier work that often points at a hidden problem.
- The written estimate, not any price range, is the number you pay.
- Free estimates on every job. Call (888) 841-6695 to schedule.
Chimney Cleaning Cost Breakdown (2026)
Frankford home values are lower than much of the region, and that shows up in the chimney work: many houses here have older masonry chimneys with unlined or partially failed flues, so the first visit often turns up more than a routine sweep. Prices below reflect what a chimney job typically runs in Frankford in 2026.
| Line Item | Typical Range |
|---|---|
| Standard sweep, one flue | $185 – $320 |
| Second flue, same visit | $75 – $150 |
| Level 1 visual inspection (included with sweep) | $0 |
| Level 2 video inspection (camera up the flue) | $150 – $280 |
| Stuck, rusted, or broken damper repair | $145 – $325 |
| Cap supply and install (Gelco or Famco) | $185 – $440 |
| Crown repair or resurfacing | $325 – $950 |
| Chase cover replacement (factory-built chimney) | $240 – $560 |
| Creosote removal, Stage 2 (moderate) | $250 – $400 |
| Creosote removal, Stage 3 (glazed, hard removal) | $450 – $1,100 |
| Firebox resurfacing (HeatShield) | $600 – $1,600 |
| Relining, DuraFlex flexible stainless | $1,800 – $4,800 |
| Full chimney rebuild (upper portion) | $4,000 – $12,000+ |
What pushes a job toward the top of those ranges: heavy creosote that has to be scraped before it can be brushed, a flue that’s offset so the brush can’t pass straight through, a chimney with no cap that’s been open to weather for years, and any roof access that requires special care on the pitch. What keeps a job at the bottom: a straight flue, a clean cap, easy roof access, and a sweep that hasn’t been skipped for a decade.
We don’t quote off a phone call alone on anything beyond a basic sweep. Creosote depth and liner condition are visual facts, and guessing at them is how a cheap job becomes an expensive one. The free estimate exists so that the number we give is the number the chimney actually requires.
What Affects Chimney Cleaning Pricing in Frankford
Frankford’s housing stock is one of the biggest pricing factors here. A lot of the rowhouses and older detached homes date from an era when chimneys were built for coal or multiple appliances sharing flues. Those chimneys tend to be wider, more irregular inside, and more likely to have orphaned flues. A brick flue that was designed for coal and is now used for wood or gas is usually easier to sweep, but it needs a careful inspection because the mortar inside has often softened.
- Creosote stage. Stage 1 is soot and dust, quick to brush. Stage 2 is flaky, crusted creosote that takes real scraping. Stage 3 is glazed, tar-like, and often needs chemical treatment before it can be safely removed. Each stage adds labor, and Stage 3 is where hidden chimney fires often leave the worst damage.
- Flue type and length. A straight, short factory-built flue sweeps faster. A tall interior masonry flue with an offset takes longer, and if the flue has more than one offset it sometimes needs a video check before we know the brush will pass.
- Access and roof pitch. A chimney on a steep or slate roof is slower and more careful work than one reachable from a flat or low-slope roof. Access is priced into the job, not into a hidden fee.
- What the inspection finds. A cap missing for years lets water in, which spalls the crown and softens the firebox brick. Those repairs are separate line items, and they’re often what the homeowner didn’t know was coming.
- Fireplace and appliance type. Wood-burning fireplaces, wood stoves, and gas inserts all sweep differently. A gas insert still needs sweeping of the flue and checking of the venting, and the buildup in a gas flue is different from a wood flue.
- Whether the chimney has ever been lined. In older Frankford homes, an unlined flue is common, and any sweep on an unlined chimney needs the flue inspected before we recommend regular use. We specify DuraFlex flexible stainless steel liners because that’s the industry-benchmark liner system professional installers rely on, and a properly sized liner is what keeps a wide old clay flue working for wood or gas safely.
How to Save on Chimney Cleaning
The biggest saving on a chimney sweep in Frankford isn’t a coupon – it’s catching the problem while it’s still cheap to fix. A $250 sweep now versus a $4,000 rebuild in five years is the whole math of chimney maintenance.
- Book a sweep before the heating season gets busy. Scheduling the sweep the moment you notice the first drafty evening or the first smoky backdraft means we can fit the job in without pressure, and it gives you time to decide on any repair the inspection turns up.
- Get the whole chimney looked at in one visit. A sweep with a proper inspection covers the flue, firebox, damper, cap, crown, and chase cover in one trip. Splitting that into multiple visits is where homeowners pay twice.
- Fix the cap before the crown. A missing or loose cap is the reason crowns spall and fireboxes soften. We specify Gelco and Famco caps because they fit the flue correctly and hold up against weather, which is far cheaper than a crown rebuild later.
- Keep the wood dry and burn seasoned fuel. Green or wet wood produces more smoke and more flammable creosote. Dry, well-seasoned wood burns cleaner and slowly reduces how often the flue needs to be swept.
- Don’t skip a sweep because the fire “seems fine.” A chimney with heavy creosote can behave perfectly right up until it doesn’t. The sweep is the diagnostic step, and any honest estimate depends on it.
- Take the free estimate. There is no charge for the estimate, and the price is set per job in writing. Call (888) 841-6695 to book it.
What a Chimney Sweep Visit Actually Involves in Frankford
A standard sweep starts with drop cloths and a sealed work area, then a brush and rods sized to the flue. We run the brush from the top or through the firebox depending on access, then vacuum with HEPA filtration so soot doesn’t drift into the room. Once the flue is clear, we check the firebox, damper, smoke chamber, crown, and cap. If the flue is offset or has never been inspected, we put a camera up it. That video inspection is what turns guesses into facts, and it’s how we tell you whether the flue is sound or needs a liner before you burn again.
Creosote: Why the Stage Matters for Price
Creosote is the residue left behind when wood smoke cools inside the flue. It builds in three recognizable stages. Stage 1 is a light soot layer that brushes away quickly. Stage 2 is flaky or crunchy and takes scraping and careful brushing. Stage 3 is a hard, tar-like glaze that has bonded to the flue wall, and it’s the most dangerous because it burns hot and can fuel a chimney fire. Stage 3 removal is priced separately because it’s genuinely different work – sometimes chemical treatment is needed first, and sometimes a liner is the safer answer if the flue’s clay tiles are cracked underneath the glaze.
If your fireplace is smoky, drafting poorly, or has a strong creosote smell in the warmer months, that’s a sign the flue needs a sweep and the smoke chamber may need attention. Those are the calls worth making before the first cold snap. Call (888) 841-6695 and we’ll book a visit.
Caps, Crowns, and the Rest of the Envelope
Most chimney problems we see in Frankford trace back to water. A chimney without a cap takes rain straight down the flue, and over enough winters that water spalls the crown, softens the firebox brick, and rusts the damper. We specify Gelco and Famco caps because they’re built for weathertight performance and a correct fit on the flue, not generic hardware. When a crown is already cracking, we can resurface it rather than tear the top of the chimney down. And when the firebox itself has spalled or the liner joints are failing, HeatShield lets us resurface and seal the firebox and joints in qualifying systems without a full demolition – that alone is often the difference between a repair budget and a rebuild budget.
That’s the reason we describe the work as a full-system job. The liner, the cap, the crown, the firebox, and the damper all share the same weather, the same fire, and the same chimney. Handling them one at a time with separate contractors is how a small problem grows while you wait for the second appointment.
What to Do When the Chimney Fails on a Saturday
A chimney isn’t something to troubleshoot on your own if it’s actively smoking or a damper is stuck closed. Stop using the fireplace, open windows if there’s smoke in the room, and call us. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Same-day service is available when you call during dispatch hours.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Frankford in 2026?
Chimney cleaning in Frankford typically runs $185 to $320 for a standard single-flue sweep. Add a Level 2 video inspection and the range moves to $320 to $550. Heavy creosote, damper repair, and cap work are priced as separate line items on the written estimate. Call (888) 841-6695 for a free estimate – we’ll give you the exact number for your chimney, not a phone-call guess.
How often should a chimney be swept in Frankford?
For a chimney used regularly for wood, an annual sweep is the working rule, and it’s the number most trade guidance and insurance expectations land on. A chimney burned only a few fires a year can often go longer between sweeps, but the inspection still matters because water damage and a failing cap don’t wait for the fire to be lit. A sweep visit that ends with “you’re fine, see you next year” is a cheap outcome. Call (888) 841-6695 to schedule.
Is it cheaper to repair or replace my chimney?
Repair is almost always cheaper unless the chimney structure has failed through multiple courses of brick. A $325 to $950 crown repair, a $600 to $1,600 HeatShield firebox resurfacing, or a $1,800 to $4,800 liner replacement each fix a defined problem. A full upper rebuild at $4,000 to $12,000 or more is the last resort when the masonry itself has gone. The video inspection is what tells you which category you’re in, and it’s worth the $150 to $280 to know before you spend anything larger. Call (888) 841-6695 for a free estimate on the repair options that fit your chimney.
Do you charge extra for same-day chimney service?
No. The price for a chimney job is set by the written estimate for the work, and same-day timing doesn’t change it. If you burn wood regularly or notice a strong creosote smell in warm weather, call (888) 841-6695. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is chimney cleaning worth the money if I only burn a few fires a year?
Yes, because the sweep is as much an inspection as a cleaning. On a chimney that’s only lightly used, the sweep visit catches a missing cap, a cracked crown, or a rusted damper before the next winter makes the problem bigger. A $185 to $320 visit that rules out a hidden failure is the cheapest chimney work you’ll ever buy. And on a house you’re selling, a documented sweep and inspection answers the buyer’s question before it becomes a negotiation. Call (888) 841-6695 for a free estimate.
Can you clean, reline, and cap my chimney in one visit?
A sweep and cap can usually happen on the same visit. A reline is scheduled as a separate job with its own estimate, typically $1,800 to $4,800 for a DuraFlex flexible stainless installation, because the flue needs to be swept, measured, and inspected before the liner goes in. One contractor handling all of the work is the difference you’re paying for on a full-system job. Call (888) 841-6695 to talk through the sequence.
Pricing reflects the Frankford market as of 2026. Chimney Sweep Mayfair offers free estimates – call (888) 841-6695.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Katie Whitaker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Lucia Morales"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Neil Lawson